E5908-0TD044-L Without Shielded Stacked 2×5 10 Port RJ45 Modular Jack
E5908-0TD044-L Without Shielded Stacked 2×5 10 Port RJ45 Modular Jack
| Categories | Connectors, Interconnects |
| Modular Connectors - Jacks | |
| Application-LAN | ETHERNET(NoN POE) |
| Connector Type | RJ45 |
| Number of Positions/Contacts | 8p8c |
| Number of Ports | 2×5 |
| Applications Speed | RJ45 Without Magnetics |
| Mounting Type | Through Hole |
| Orientation | 90° Angle (Right) |
| Termination | Solder |
| Height Above Board | 24.65 mm |
| LED Color | Without LED |
| Shielding | Unshielded |
| Features | Board Guide |
| Tab Direction | UP & Down |
| Contact Material | Phosphor Bronze |
| Packaging | Tray |
| Operating Temperature | -40°C ~ 85°C |
| Contact Material Plating Thickness | Gold 6.00µin/15.00µin/30.00µin/50.00µin |
| Shield Material | Brass |
| Housing Material | Thermoplastic |
| RoHS Compliant | YES-RoHS-5 WIth Lead in Solder Exemption |
The RJ network interface layer corresponds to the physical layer and data link layer in the OSI reference model. The RJ network interface layer is the interface between TCP/IP and various LANs or WANs.
The RJ network interface layer encapsulates the upper-layer IP datagram into a frame at the sending end and sends it to the network; when the data frame reaches the receiving end through the network, the RJ network interface layer of the node unpacks the data frame and checks that the frame contains The MAC address. Assuming that the address is the MAC address of the machine or the broadcast address, upload it to the network layer, otherwise the frame will be lost.
Write your message here and send it to us
